No pictures, but I used the switch that was for start safety tht only let the r start with the cutch depressed and unplugged it from the wiring and wired the ground wire from my TB relay thru it since it just completes a circuit. I then tied the original wiring for start sfety into the nuetral/park safety switch on my shifter whih gave me back the start safety for the car to only start in Nuetral or Park. I then bought a stiff enough spring from a hrdware store with eyelet hooks on each end and drilled a hole thru the clutch pedal arm attaached it there and then attached the other end to the metal framework under the dash to give the cutch pedal a return spring with a sorta stiff pedal feel to it, so you could feel when you were pushing the pedal in. Transbrake would activate when the pedal was on the floor.