Here is a pic of the T.C Box that i have been working with a company for Hp street cars. As you can see in size its very small as my blackberry is next to it.
The box is a self leaning box, It senses wheel speed off the factory speed sensor which has twelve notches in it. Therefore it can detect wheel slip within 2-4inches of wheel movement. It is always recording the driveshaft speed and can detect spikes in the wheel speed. Unilike a factory systems that use 4 wheels speed sensor that have to messure 4 inputs and do the math and then send the response, this box messure the driveshaft speed in one shot.
The t.c box requires a Msd Timing twister box which is plug and play to the Ford Gt with no cutting of anywiring except for power. The timing twister is a timing retard box and uses a 0 to.5volt reference for timing retard. The Traction control box sends a 0to.5 signal depending on the amount of wheel slip. The t.c box also has adjustability in it to allow how fast the timing is ramped back in and the amount of sensitivity to the box depending Hp of the cars as less hp cars will need more sensitivity then high hp cars. You can also adjust how much timing you want taken out upon wheel slip. On the mod motors is does not take much more than 12degrees to really kick the dick out of the power
The T.C box also is a easy install with a power,ground, and 1 wire to the factory speed sensor. Then wire 0to.05volt referense wire up to timing twister.
Dodge contracted the company that built this box and it is standard item on the Viper Acr racecars. The viper has a 0 to .5volt timing retard wire that is not used in there factory pcm so it made installation even easier as it does not need the timing twister.
The box is a self leaning box, It senses wheel speed off the factory speed sensor which has twelve notches in it. Therefore it can detect wheel slip within 2-4inches of wheel movement. It is always recording the driveshaft speed and can detect spikes in the wheel speed. Unilike a factory systems that use 4 wheels speed sensor that have to messure 4 inputs and do the math and then send the response, this box messure the driveshaft speed in one shot.
The t.c box requires a Msd Timing twister box which is plug and play to the Ford Gt with no cutting of anywiring except for power. The timing twister is a timing retard box and uses a 0 to.5volt reference for timing retard. The Traction control box sends a 0to.5 signal depending on the amount of wheel slip. The t.c box also has adjustability in it to allow how fast the timing is ramped back in and the amount of sensitivity to the box depending Hp of the cars as less hp cars will need more sensitivity then high hp cars. You can also adjust how much timing you want taken out upon wheel slip. On the mod motors is does not take much more than 12degrees to really kick the dick out of the power
The T.C box also is a easy install with a power,ground, and 1 wire to the factory speed sensor. Then wire 0to.05volt referense wire up to timing twister.
Dodge contracted the company that built this box and it is standard item on the Viper Acr racecars. The viper has a 0 to .5volt timing retard wire that is not used in there factory pcm so it made installation even easier as it does not need the timing twister.