TR6060 Swap VSS question

[KingCrabb]

Hey guys, I'm currently in the middle of swapping a 6060 into my '14. I noticed the coyote chassis has a 3 wire VSS and the 6060 uses a 2 wire.
I have searched Google and found nothing concrete.
Thanks for the help!

 

[wakebum2507]

you'll need the abbot box, or another speedo calibration conversion box that will have a 2 wire output. JPC sells them in their swaps. Contact Aaron or eric.

 

[KingCrabb]

I have the 2 wire pig tail for the 6060 sensor.
The calibration box is not needed. I just need to know the pin out for the 3 wires so I can wire in the 2 wire 6060 sensor. The speedo will be off but Dadan and Adam say they have a way around it.

 

[wakebum2507]

ahh so you just need to know which wires go to which colors.

i have it written down at home. give me a little bit.

 

[KingCrabb]

Awesome. Thanks!
I assume there is a Ground,Signal,5v

 

[KingCrabb]

Were you able to find it?