Tr6060 in foxbody coyote swap

foxyote

New Member
Established Member
Joined
Sep 22, 2023
Messages
16
Location
california, bay area
So I just bought a tr6060 from a 2007 shelby gt500 with 4000 miles. I was able to get the tr6060, stock clutch, flywheel, throwout bearing, crossmember, and MGW shifter for $1700.

Probably going to go with a 13' clutch. Trans is going into a foxbody with a coyote gen 2 swap. I also have a 2020 predator blower going on the coyote motor.

Has anyone put a tr6060 into a coyote swapped fox? I know the magnum is a much better option, but for the price of the tr6060 I thought it would be worth it.


I know the shifter is going to be the biggest hurdle but anyone have ANY incite on this? Help is appreciated.
 

bird_dog0347

Well-Known Member
Established Member
Joined
Aug 23, 2013
Messages
735
Location
Little Elm, TX
I don't have any personal experience with it, but I have heard that you will likely have interference with the floor pan, might be a bigger PITA than it's worth.
 

bird_dog0347

Well-Known Member
Established Member
Joined
Aug 23, 2013
Messages
735
Location
Little Elm, TX
From my understanding (which isnt much) i thought the tr6060 and t56 magnum were ALMOST identical dimensionally.
I think it's the rear half that isn't, plus with the way you have to use the remote shifter and driveshaft.... just convert the TR6060 to a T56.
 

Users who are viewing this thread



Top