TONS of parts 99-04 mustang GT cobra and termi parts

[mustangman36578]

tons of parts mostly from a 2000 GT but also a few peformance parts for 99-01 cobras and stock engine parts for 03/04 cobras

FPDM out of 2000 GT
19# fuel injectors (stock GT injectors)
radiator fan. 1 mounting tab is broken
coolant reservoir. has 1 broken tab
hood latch mechanism
cobra fuel rails (2 sets)
head liner. has small rip from removal on rear driver side
stock front springs with isolators
stock rear springs
eibach 1.5" lowering springs (fronts only) part number is 157104-2. less than 1 year old
2000 GT fuel tank with fuel tank cover and fuel pump. fuel pump has approx. 6,500 miles on it
2 bfg G-force 275/40/17 tires with decent tread
radio bezel. it is painted red
rear quarter windows pass. and driver side
passenger side door with power windows, door panel, power mirror, and hinge
wiper motor with linkage and passenger side wiper arm
black C-pillar. (plastic part that goes over the top of the rear quarter)
instrument panel cover
passenger side visor
washer fluid reservoir with pump
cruise control module
03/04 cobra stock heat exchanger
cobra throttle body (2)
03/04 cobra plenum painted black
timing cover for 4.6 DOHC engine (3 available)
spec stage 1 clutch approx. 6,500 miles

BBK cold air intake (99-01 cobra) -SOLD
steering rack with tie rod ends - SOLD
03/04 cobra stock crank pulley with cage - SOLD
spare tire - SOLD
heater core with blower motor, ac controls, blend door, and all vaccum lines and modules. - SOLD
2000 GT dash wiring harness - SOLD
maximum motorsports strut bar (99-01 cobra) - SOLD
mustang body wiring harness- SOLD
clutch pedal assembly - SOLD
stock k member with control arms, steering knuckles, caliper brackets, rotors, and the bar that runs along the back of it - SOLD
dark charcoal leather seats. driver side has small rip. - SOLD
driver side and passenger side air bags with air bag module - SOLD
24# fuel injectors (stock 99-01 cobra injectors) - SOLD
aluminum flywheel SOLD
dome light assembly with bulbs - SOLD
99-04 cobra DOHC valve covers in great shape -SOLD
power steering reservoir - SOLD
03/04 lower intake. has a small crack in it- SOLD
31 spline axles. 1 axle will need a repair bearing. - SOLD
ABS module - SOLD
glove box - SOLD
mach 460 speaker covers - SOLD
various dark charcoal plastic interior pieces. - SOLD
90 mm ford lightning MAF meter - SOLD


can provide pics of everything upon request. all prices are obo and shipping is not included.
thanks,
Brian

 

[Revolator]

do you have the door cup bezels by any chance?

 

[mustangman36578]

sorry driver side sold with the door. i do have the passenger side however it is painted red.

 

[eschaider]

Which 4.6 is/are the timing covers for?

Thx,

Ed

 

[mustangman36578]

pretty sure they came off the aviator. i can get part numbers off of them later tonight. here is a pic of what they look like.

[/IMG]

 

[mustangman36578]

bump. a few more items added

 

[eschaider]

pretty sure they came off the aviator. i can get part numbers off of them later tonight. here is a pic of what they look like.

mustangman,

Your right that is an Aviator cover. I can make it work but I need to do some fabricating. My preference, if you have one, would be a 95 - 98 Mark VIII with the tensioner in the same location and the single pulley next to the tensioner w/o any pulleys on the driver side of the cover. It has some power steering bosses (the Aviator doesn't) I use to mount other stuff.

Thx,

Ed

 

[mustangman36578]

nope sorry here are pictures of the other 3. all are the same.

[/IMG]

[/IMG]

 

[mustangman36578]

bump

 

[03WhiteSVTCobra]

can you put pics up of black painted plenum?

 

[mustangman36578]

yep. i will get them up later tonight around 8

 

[mustangman36578]

here are the pics of the plenum

[/IMG]

[/IMG]

 

[mustangman36578]

*updated* to the top.

 

[mustangman36578]

bump few more items added.

 

[mustangman36578]

bump

 

[mustangman36578]

bump

 

[bsmith782]

Do you have a Traction Control button that would fit a 99 cobra?

 

[danny14gnx]

Would you sell me just the flywheel, & how much, pics?

 

[svt1998]

is the steering wheel for a cobra does it have the front panel that reads cobra?let me asap

 

[35THCONVERTIBLE]

pics of the axles please very interested todd 606 269 2432 thanks