Timing pics please

[Slow99x]

I need to set the timing on my car and I just want to set it to factory specs after I put a new shortblock in. I had the heads cleaned up and new valve seals put in. I need to see if anyone can post pics of an engine with the factory timing so I can see how the cams are aligned when the engine is at TDC. If you could take some close ups of each side and the crank it would be awesome. Thanks guys

 

[Slow99x]

Anyone? Help...please

 

[10splaya22]

Would it be in the service manual?

 

[Slow99x]

I have no idea. I was hoping someone would have an engine apart

 

[jrgoffin]

Get a service manual.

Or use this:

http://www.fordracingparts.com/download/instructionsheets/FordInstShtM-6004-A464.pdf

 

[RacerXHG]

Engine assembly pdf: Mach 1 Engine assembly PDF attached - 2003-04 Mach 1 Registry Owners Club

If you're putting her together like Ford assembly line, Dot-To-Dot, you can start on about page 9. It's very simple.

 

[Slow99x]

Engine assembly pdf: Mach 1 Engine assembly PDF attached - 2003-04 Mach 1 Registry Owners Club

If you're putting her together like Ford assembly line, Dot-To-Dot, you can start on about page 9. It's very simple.

Thank you. That is exactly what I needed

 

[SecondhandSnake]

Just a tip-
Make absolutely sure you follow those steps, and put the chains on at the same time.

I know of at least 2 people who have put one chain on, timed it, then put the other chain on and ended up with one bank 180deg from where it should be.