Timing Components upgrade ? 1000rwhp

[kleistang]

Hey guys. What needs to be changed to run 1000rwhp safely as far as timing components go (guides, chains, tensioners etc.

Thank you.

Current build list:
MMR1500 Shortblock
Manley I Bean rods
Manley pistons
Sleeved 2015 block
Boss 302 crank
2014 heads
Billet oil Pump gears
Billet crank timing gear
Arp everything
Compcams stage 2 turbo cams with limiters
tfs1 valve springs
Manley race intake valves
Manley Heavy duty Exhaust valves
Boss Intake manifold
Jpc Turbokit
Circle d converter
Aluminum driveshaft
Full rear suspension

 

[stangn]

I don't make 1000, but I'd say boss chain tensioners, MMR secondary chain and flip bracket, guides wouldn't hurt either.
Don't think you have to have any of it with a turbo. Think guys have made that with stock parts. Again I'm in a low power blower car. 650 whp with A6. Blower cars use that stuff because of driving the blower from the crank.

 

[RAZRS EDGE]

Boss Primary and Secondary Chain Tensioners
Oil Pump Gear
Billet Crank Sprocket
MMR Secondary Tensioner Bracket
MMR HD Secondary Chains

 

[Slowb00st]

Boss Primary and Secondary Chain Tensioners
Oil Pump Gear
Billet Crank Sprocket
MMR Secondary Tensioner Bracket
MMR HD Secondary Chains

I was looking a the tensioners and for the secondaries tensioners the same part number popped up for the gt and boss.

 

[Blazer707@TBR]

On my MMR build I went.

MMR OPG's
MMR crank sprocket
MMR billet guides
MMR HD secondary chains
MMR secondary flip bracket
stock primary chains and tensioners.

 

[kleistang]

So i added the HD Secondary chains and secondary tensioner bracket. whats the benefit of the guides and tensioners ?
Are the boss better than stock ?
Why Billet guides?

Thx

 

[Slowb00st]

So i added the HD Secondary chains and secondary tensioner bracket. whats the benefit of the guides and tensioners ?
Are the boss better than stock ?
Why Billet guides?

Thx

The tensioner should have a stronger tension, but dont quote me on that. As for the guides less flex than plastic.

 

[kleistang]

The tensioner should have a stronger tension, but dont quote me on that. As for the guides less flex than plastic.

I ordered the tensioners. Just trying to justify the guides ? hard to believe the benefits idk.

 

[J_verrett5oh]

all my timing stuff is stock. but im doing a motor refresh soon and only thing I will be changing is crank sprocket