Throttle Body for 2.6 Kenne Bell (Need Recommendations)

[Eric Garttner]

Hey guys so I recently had my car on a mustang dyno and made 557/512 at 18.5psi through my stock throttle body. Looking to do some work over the winter and figured I'd get a tb that'll breathe better. Looking to stay away from accufab because I don't want to deal with the stick god forbid it started happening.

Any and all recommendations are appreciated.

 

[Soap]

That is a myth. All I've ever run on my toys are Accufab and none have ever had a sticky throttle blade.

So my recommendation is Accufab.

--Joe

 

[01yellercobra]

Mine was sticky when I first picked up the car. It was just bad enough to make me look like I didn't know how to drive a clutch. Half a turn on the throttle stop and it's smooth as stock.

 

[cj428mach]

As a former owner of a billetflow and an accufab, get the accufab.

 

[Eric Garttner]

As a former owner of a billetflow and an accufab, get the accufab.

What was wrong with billetflow?


Sent from my iPhone using the svtperformance.com mobile app

 

[cj428mach]

It was a pos that wouldnt idle below 1000rpm even with tune tweaks. The accufab could idle lower than the engine could even handle.

 

[Stage 4.6]

I run a acuufab on my KB2.6H and i have never had a sticky thrittle body issue?

 

[BMSTNG]

I have an accufab, going on about 2yrs now and never had a problem with sticking, idling or anything else. It works flawlessly and I would definitely recommend it to anyone.