i run an on3 performance one and havent noticed any difference. you do lose the bypass but im ok with that. a plus is that it cleans things up a lotwhat effect will the crossover delete have?
you do lose the bypass but im ok with that. a plus is that it cleans things up a lot
I would like to see how you modded yours.You don't have to lose the bypass. I modded mine so the plumbing is just like stock (including bypass).
--Joe
I would like to see how you modded yours.
No pics, just drill and tap (or weld) the side for a fitting and run it down to the thermostat housing and I welded an AN fitting on the thermostat housing.
--Joe
Welded a -8AN bung to the t-stat housing
View attachment 1576908Untitled
MMR crossover delete with filler cap options and just drilled/tapped a fitting to route down to the modded T-stat housing bung
View attachment 1576909Untitled
You also have to extend the coolant temp sensor harness. Really easy, its jsut two wires.
Stock length
View attachment 1576910Untitled
Extended
View attachment 1576911Untitled