I was shredding blower belts and thought my stock tensioner had gone bad so I replaced it with a Thump tensioner and pulley.
Same problem with shredding belts.
When I put a straight edge on the tensioner pulley, it is forward of the crank pulley and tilted.
It's almost as if the bridge that holds the tensioner is bad or cracked or...
Has anyone seen this problem?
Same problem with shredding belts.
When I put a straight edge on the tensioner pulley, it is forward of the crank pulley and tilted.
It's almost as if the bridge that holds the tensioner is bad or cracked or...
Has anyone seen this problem?