I've got a 93 coupe with a 04 cobra engine lentech 4r70w and a 2.73 gear on a 28 in tire it has a 2.8 upper pulley only the car went a 1.63 60ft 7.37et at 95 mph
Tell me what y'all think
- Thread starter 93notchstang
- Start date
Nice time! I think you should be a little closer if not in the 6 second zone with a different rear gear. I would probably put a 3.55 or 3.73 out back and hang on. I just went 7.40 with my Termi with stock pulley and 3.73 gear. With the auto, weight advantage, and pulley I think you should be running in the 6.8X-6.9X's with a different gear.
I had a 3.73 in it and it went a 7.40 with a 1.58 60ft spinning at 91 mph I'm really wanting 6.90s with the stock blower then I have a stage 4 blower single blade tb and plenum to throw on and plan on putting a 4 pound lower also
6.90's with stock blower is very possible. I went 7.09@98mph with my first Cobra with bolt-ons and 2.8 upper/no port. What tires are you running?
275/60/15 mickey thompson drag radials
Id go with a 26 inch tire. A 28 is going to kill your gearing.
Its hard to hook it with a 28 I can't imagine a 26in
Its hard to hook it with a 28 I can't imagine a 26in
My Terminator Fox ran 95 in the 1/8 with the stock Eaton with a 7.6 ET
If you have the SRA in there you can do suspension work to stop the car from spinning. How much does your car weigh? Mine is 3460lbs.
If you can't hook on the tires you are running then work on your suspension because you shouldn't have issues with the power you're making with the auto.
Pinion angle is set at 3 degrees 50/50s on rear with 4cyl springs and stock up front with stock struts it has all adjustable upr rear suspension
The biggest problem with mine is track prep
Must be. My 90 fox has went a 1.33 60ft on 26x10 t drags. 1.40 on 275/40/17 M/T drag radials.
Strange 10 way struts and shocks,125in/lbs 14" front coil over springs. Old school HPM mega-bite jr lowers and HPM non adjustable uppers,stock V8 springs in rear with an air bag in the right rear.
Users who are viewing this thread
