My buddy who doesn't have internet access asked me to do some research for him. He recently installed a carb'd 306ci motor in his 95 GT. It is making some strange noises on start up and when you shut the car down. He describes it as a clanking sound coming from the drivers side valve cover.
He said he took the valve cover off and nothing seems wrong. He is plannign on takign it back to the shop next week but was curious if anyone had any ideas. He was also curious about what kind of HP/TQ he should be putting down.
Here are his specs:
306ci
Stg 1 Trickflow cam 499/510 221/255
Trickflow Heads 202/160
Holley 650 dbl pumper
Victor Jr. Intake
Fedenza Flywheel
1 3/4 Longtubes w/ 2 1/2 catless
Underdirve Pulleys
Forged Probe Flatop pistons
He said he took the valve cover off and nothing seems wrong. He is plannign on takign it back to the shop next week but was curious if anyone had any ideas. He was also curious about what kind of HP/TQ he should be putting down.
Here are his specs:
306ci
Stg 1 Trickflow cam 499/510 221/255
Trickflow Heads 202/160
Holley 650 dbl pumper
Victor Jr. Intake
Fedenza Flywheel
1 3/4 Longtubes w/ 2 1/2 catless
Underdirve Pulleys
Forged Probe Flatop pistons