Talk to me, Gears?

02GTKB

Nolimits
Established Member
Joined
Dec 5, 2008
Messages
3,092
Location
Upstate NY
I want some advice from those who have a similar setup as mine. I run the stock gears now, but what I am wanting if it is possible to get that quicker 0-150mph. I will obviously not go near 200mph. I feel 4.10s are too steep, maybe 3.73? My setup is in my signature. Looking for that lower end feel
 

paluka21

Well-Known Member
Established Member
Joined
Aug 24, 2004
Messages
2,599
Location
Maryland
With a 315 NT05r a 4.10 gear would be a good choice because of the height of the tire. I run a slightly shorter tire with 3.73's and am happy, but would want a 4.10 if I had NT555r or NT05r.
 

Catmonkey

I Void Warranties!
Established Member
Premium Member
Joined
May 20, 2011
Messages
3,854
Location
Louisiana
3.73 will get you to 150 mph with a 27.7" tire (285/35-20) at ~7,000 rpm in 4th. 4.10 will drop that 4th gear top speed to something around 135 mph. A shorter tire will drop both those speeds and a taller tire will extend them.
 

biminiLX

never stock
Established Member
Premium Member
Joined
Jan 17, 2003
Messages
13,293
Location
Toledo, OH
Dude no offense but this has been discussed MANY times.
4.10 and 305/315 R-compound is my suggestion and I've had both 3.73 and 4.10.
With a 0.50 6th and taller 20" rear tire there is no reason to fear the gear.
4.10 and 315/35/20 is 2000rpm at 80mph so no rational for less gear.
-J
 

biminiLX

never stock
Established Member
Premium Member
Joined
Jan 17, 2003
Messages
13,293
Location
Toledo, OH
Reread your sig, not sure on your power, but we run same tire.
I was just datalogging today and 6900rpm was 143mph roughly.
I'm setting mine up for drag racing, but this combo is awesome from 50-150 on the street.
If you want more chance hooking up from lower roll speeds, consider 3.73 but if you're rolling from 40+ I still say 4.10.
Car will feel much better off boost also.
Run 26-28psi and suspension in normal not stiff.
-J
 

02GTKB

Nolimits
Established Member
Joined
Dec 5, 2008
Messages
3,092
Location
Upstate NY
Thanks guys, I datalog an 08 with my old 2.8 Kb and he has 4.11s and it just seems to much imo..80mph or more just seems it stops pulling or something.
 

Catmonkey

I Void Warranties!
Established Member
Premium Member
Joined
May 20, 2011
Messages
3,854
Location
Louisiana
An '08 has a bit different transmission gearing from a 13-14 and not really an apples and oranges comparison.
 

02GTKB

Nolimits
Established Member
Joined
Dec 5, 2008
Messages
3,092
Location
Upstate NY
An '08 has a bit different transmission gearing from a 13-14 and not really an apples and oranges comparison.
Yea I figured, but down low his is for sure quicker than mine. My car 80+ feels the pull where his dies out. I want both worlds I guess guys haha
 

Jam421

Jam421
Established Member
Joined
Sep 15, 2010
Messages
480
Location
Long Island NY
4.10 and 315/35/20 is 2000rpm at 80mph so no rational for less gear.
That's my set up with same rpm at 80mph. The taller MT's actually make my 4.10 around 3.90. If I'm rolling hard I'm off the gas by 135mph which is just about tickling a bit below redline.
 

Users who are viewing this thread



Top