Does anyone know if the 19x10 Ford Racing version of the SVTPP wheels will fit on the front?
SVTPP Ford Racing wheels
- Thread starter BANDIT HPT
- Start date
This is the wheels I'm looking at
FORD RACING 2011-2012 SHELBY GT500 19 INCH FORGED TRACK PACK REAR WHEEL -- M-1007-SA1910
FORD RACING 2011-2012 SHELBY GT500 19 INCH FORGED TRACK PACK REAR WHEEL -- M-1007-SA1910
They fit just fine, and my car is lowered by 1.5 in the front
How wide of tire are you running?
I was curious if I could get away with 19x10 with 285/35-19 tires on the front and rear. I might be asking for too much
The tires will fit (285 f&R) but I'm not so sure about the 19" x 10" FRPP faux SVT PP wheels. Let me put it this way - the real SVT PP rear wheels (20" x 9.5") won't fit up front. Not due to diameter (haven't verified that) but due to caliper clearance. You need a spacer, ~1/8" IIRC, to gain the necessary clearance there.
You may just have to go with the FRPP designed front wheels, as they'll still take a 285 and you know they have adequate caliper clearance as well.
Tob
You may just have to go with the FRPP designed front wheels, as they'll still take a 285 and you know they have adequate caliper clearance as well.
Tob
Big heavy car needs some meat under it : )
Wheels look good. Thanks for the post, Im considering the same set myself. Mike
If I didn't tell you I'll bet you would have never known you were looking at factory 285's on the front of the following car...
Isn't overkill what the GT500 is all about?
Yes they fit. I have 285 on front and I am on Sportlines!!
By the way the 19x10 will fit upfront without a spacer. These will actually clear the Shelby Extreme Brakes front and rear without spacers. Has been verified by a TS member that I sent an extra wheel I have for fitment verification, he has these brakes installed. I am using BFG KDW2 285/35/19 on front and 295/35/19 on rear.
By the way the 19x10 will fit upfront without a spacer. These will actually clear the Shelby Extreme Brakes front and rear without spacers. Has been verified by a TS member that I sent an extra wheel I have for fitment verification, he has these brakes installed. I am using BFG KDW2 285/35/19 on front and 295/35/19 on rear.
Last edited:
you're running a 10" wheel in the front?
yes...19x10 on all 4 corners
They fit just fine, and my car is lowered by 1.5 in the front
Love your car, nice and subtle
I was going for the same until I talked to CCW...the 11's on the back with 325/30/19 pretty cool to me...make the car look more aggressive to me
^^^^^ looks awesome^^^^^
Users who are viewing this thread
