stock rod limit?

Brad003

New Member
Established Member
Joined
Jun 18, 2013
Messages
41
Location
Kentucky
Does anyone know the max numbers for rwhp/rwtq or the amount of boost that the stock rods can handle in a 2002 HDSC?
 

Bandit5.4

Slow driver
Established Member
Joined
Jul 11, 2008
Messages
685
Location
Plano, TX
The generally accepted limit for a stock motor is around 450rwhp. Some have gotten away with more, others less.
 

Brad2002hd

New Member
Established Member
Joined
Sep 18, 2013
Messages
6
Location
Louisville ky
Gotcha. That is what I am supposedly going to be pushing after i put forged internals in motor. Got a dead #2 cylinder. This is brad003 by the way.
 

americansteel

Banned
Joined
Apr 1, 2013
Messages
281
Location
delaware
Gotcha. That is what I am supposedly going to be pushing after i put forged internals in motor. Got a dead #2 cylinder. This is brad003 by the way.

2 years ago i seen a HD break 2 rods with just a pulley change. i rebuilt the motor using H beam mahle rods stock crank, however the guy ordered a 5.8l big bore block from MMR so of course it would need a bigger piston.
i don't trust the stock rods above 450hp. but the HD never made 400hp. do your self a favor just buy a set good rods and pistons, you do that and you take care of the engine you can hit 150K miles.
 

c6zhombre

E85 NutSwinger
Established Member
Joined
Sep 14, 2008
Messages
5,430
Location
League City, TX
We're running my bro in laws HD with a 10lb lower, factory HD upper, fore fuel hat, 80lb inj, 2 255 walbros, kenne bell bap, and a mafia. His motor is 53k original and the eaton is factory unported. He even has the factory manifolds on it. Boost hits just over 15psi. It dynoed 466/566. It runs on E85 and is tuned by 04sleeper. He's been running it since April and it's a 4 dr beast on the streets, the eaton just screeeeaaaaammssss. No signs of letting go on that ethanol, solid fuel system and tune :rockon:
 

99 KB-R

New Member
Established Member
Joined
Apr 21, 2007
Messages
125
Location
Mandan, ND
Mine held together for prob 50k+ miles in the 420-450 range @13-15# w 2.3l kb, got tuned w 8# lower solid 15-16# dynoed 478hp 570 tq broke rod 3rd pass down the track.
 

Modular Racing

Authorized Vendor
Authorized Vendor
Joined
Jun 28, 2004
Messages
15,176
Location
877 MOD POWR
The ratings of the stock rods seem to be up to about 450, beyond this they are unreliable, below this they can be unreliable if detonation exists. The best thing to do if you are approaching these #'s is send the block in to us for a Forged rebuild ($2399)or look at one of the MMR Forged shortblocks (starting at $3199)

Modular Motorsports Racing
 

Users who are viewing this thread



Top