Stock 2v crank

[joegt38]

How much motor HP or RWHP can a stock 2v crank hold??

 

[wti01bullitt]

I was told that a GT crank will handle 500rwhp.

 

[joegt38]

Hope so...

Thanks.

 

[dalamar_96]

yep 500 HP - thats about 450 rwhp is what's recommended.
NA - the crank (not the rods) can take more, under boost it's different, more torque
cast breaks where forged will flex a little.

 

[joegt38]

yep 500 HP - thats about 450 rwhp is what's recommended.
NA - the crank (not the rods) can take more, under boost it's different, more torque
cast breaks where forged will flex a little.

Yeah the rods and pistons are being changed. My set up will push about 500rwhp, I was told if I don't spin it to high (the RPMS) I shoud be fine...Hope so.

Thanks guys.

 

[00PONY]

Damn just spend the extra 300 bucks while the motors out and get a cobra crank. that will same you from tearing the motor apart when you DO break it. find a good used one. GEEZ

 

[joegt38]

Damn just spend the extra 300 bucks while the motors out and get a cobra crank. that will same you from tearing the motor apart when you DO break it. find a good used one. GEEZ

I thought of that but the rods and pistons will be in by tomarrow.