Hello:
Thank you for looking.
I have a Stiegemeier Stage 4 Ported Blower with about a guesstimated of 10,000 miles on blower. It was bought in May 2008 and I had the front drive rebuilt at the time of porting and a 2.93 Black Billet Flow pulley put on.
Installed Blower in April 2009. During the install broke one of those small intercooler bolts on blower. Sent the blower out to Stiegemeier to have the bolt removed and had them install a Redfire 2.76 Redfire pulley. You can see the repair on the front passenger side hole (5th photo upper right bolt).
So, whomever the purchaser is. You will receive a BA2400 MAF (I do not know if this works). It was purchased from fellow SVTperformance member.
Gaskets as pictured in photos. 2 Billet Flow pulleys and belts to match a Billet Flow 4 Pulley snub Idler Kit (3-100mm and 1-92mm).
I'd like to get $700 shipped UPS to you.
Again, this sale includes:
1 - Stiegemeier Stage 4 with front drive rebuild (My opinion of condition 8.5 out of 10) I cleaned blower after photos were taken. Left gasket on blower and took off as much RTV as possible.
1 - Billetflow Redfire 2.76 Pulley
1 - Billetflow Black 2.93 Pulley (This Pulley has a dent on it, please see photo)
1 - New OEM T/B Gasket
1 - New OEM IAC Sensor Gasket
1 - New Stock Plenum Gasket
1 - New Front of the InterCooler Gasket
1 - BA2400 MAF ( Caution: Working Condition is not known)
1 - Gates K080751 for 2.76 Pulley
1 - Gates K080755 for 2.93 Pulley
I accept Paypal for payment
If you have any questions or require more photos, please PM or repond to this posting.
Sorry no trades and I will not seperate.
Reason for sale - Purchased a Whipple
Thank you for looking.
I have a Stiegemeier Stage 4 Ported Blower with about a guesstimated of 10,000 miles on blower. It was bought in May 2008 and I had the front drive rebuilt at the time of porting and a 2.93 Black Billet Flow pulley put on.
Installed Blower in April 2009. During the install broke one of those small intercooler bolts on blower. Sent the blower out to Stiegemeier to have the bolt removed and had them install a Redfire 2.76 Redfire pulley. You can see the repair on the front passenger side hole (5th photo upper right bolt).
So, whomever the purchaser is. You will receive a BA2400 MAF (I do not know if this works). It was purchased from fellow SVTperformance member.
Gaskets as pictured in photos. 2 Billet Flow pulleys and belts to match a Billet Flow 4 Pulley snub Idler Kit (3-100mm and 1-92mm).
I'd like to get $700 shipped UPS to you.
Again, this sale includes:
1 - Stiegemeier Stage 4 with front drive rebuild (My opinion of condition 8.5 out of 10) I cleaned blower after photos were taken. Left gasket on blower and took off as much RTV as possible.
1 - Billetflow Redfire 2.76 Pulley
1 - Billetflow Black 2.93 Pulley (This Pulley has a dent on it, please see photo)
1 - New OEM T/B Gasket
1 - New OEM IAC Sensor Gasket
1 - New Stock Plenum Gasket
1 - New Front of the InterCooler Gasket
1 - BA2400 MAF ( Caution: Working Condition is not known)
1 - Gates K080751 for 2.76 Pulley
1 - Gates K080755 for 2.93 Pulley
I accept Paypal for payment
If you have any questions or require more photos, please PM or repond to this posting.
Sorry no trades and I will not seperate.
Reason for sale - Purchased a Whipple
