Today, I decided to tackle one of the few remaining projects I had for my vert. I had a Memphis Car Audio / Pioneer system installed in my now totaled 99. When I bought it back from the insurance company, I removed it all and piled it in a corner. After doing some research, I picked up some Second Skin and some Ensolite then watched several stereo installation videos on Youtube. So today was the day.... game on.
Removed the interior first.
I vacuumed and then cleaned the surfaces with Denatured Alcohol.
Here's the back seat wells ready for sound deadening.
Second skin down
Ensolite on top of the second skin:
I then did most of the wiring, including the power wire from the battery (4ga) and the speaker out RCA's from the head unit. Here it is almost done. I still have to clean up the wiring to the amp in the trunk, but it does all work.
In each door and the back seat, I replaced both speakers. I depowered the Mach460 amps and installed a Memphis Belle. It was an entire day in the garage...good times.
Tomorrow I'll reinstall the interior and clean up the speaker wires.
Removed the interior first.
I vacuumed and then cleaned the surfaces with Denatured Alcohol.
Here's the back seat wells ready for sound deadening.
Second skin down
Ensolite on top of the second skin:
I then did most of the wiring, including the power wire from the battery (4ga) and the speaker out RCA's from the head unit. Here it is almost done. I still have to clean up the wiring to the amp in the trunk, but it does all work.
In each door and the back seat, I replaced both speakers. I depowered the Mach460 amps and installed a Memphis Belle. It was an entire day in the garage...good times.
Tomorrow I'll reinstall the interior and clean up the speaker wires.
Last edited: