Staggered wheels.

[txturbogs]

I managed to damage the wheels ont he passenger side. Even though I could repair them easily and cheaper, I want to get a set of CCW SP500. I was thinking on doing the same as with the 2011, 20" on the back and 19" up front. What do you guys think? I little wider out the back too, maybe a 10.5 or 11", just not sure what mods needs to be done to run those wheels properly. I am looking into lowering the car with some Ford Racing springs for street use, maybe 1-2" althought I am not entirely sure how much those springs would lower the car exactly.

Any input is greatly appreciated.

 

[SmirkNOS]

The FRPP Spring lower 1" and 1.25" in the back. But If you want a perfect lower look I have a set of EIBACK PRO-KIT for sell. I want $200 for them and they are brand new in the box never used. These lower your car beatiful. Most people here in the forum used them and you can find pics thru the forum. They were given to me as a gift but my car is already lower so I don't need them. They sell for around $250-70. So you this is a good deal. Let me know.

 

[Jesse@MBRP]

This is the Eibach Pro Kit with 20" front and rear from True Forged. To me, this looks best on these cars.

 

[scmustangs]

19's look a lot better than 20's

 

[2kmelat]

and 18 look even better.

 

[R1Lello]

no issue with 20/19 front, forget 18's If you get the rear spacing right, you can go 315/30/20 (27.6 tall) or the 325/30/20 (27.7 tall) like I did........if you get it close to right, several choices of 305/35's too. make sure your 19 front tire not much lower in overall height compared to the rear

 

[breoland]

who makes 315/30/20?

 

[R1Lello]

who makes 315/30/20?

Toyo R888, more of a DR though

 

[breoland]

they dont have a matching front like the nittos.

toyo has another but its a 315/25/20 but its 26.2in tall not sure how they will look i think they are the ra1

 

[fastlif]

If you like to spin tires go ahead. 18s are much better.

 

[txturbogs]

No, I do not want 18" wheels. I think they would look kind of weird. I've always liked the SP500, but those TrueForged look nice!!

 

[Steve@TF]

No, I do not want 18" wheels. I think they would look kind of weird. I've always liked the SP500, but those TrueForged look nice!!

we have a number of different 5 spoked designs in our arsenal.

here are 20" Vectors on a GT500
Tungsten Gray


20" Sleepers on a GT500
DSC00441.jpg


20" Speed Five on a GT500
Brushed aluminum with chrome lips 20x9 20x11


and some 19" Mach Five on an 03 Cobra
l_f222d9521d6a48cfba81e4b5860eaa6c.jpg


no one has put 19 or 20" Mach Five on a GT500 yet:shrug:

if you'd like to order a set for your shelby, ill give you a nice discount for being the first :beer:

 

[WP64]

The Toyo RA1 and R888's are DOT road racing tires, not DR's... They're also 100 UTQG tread wear rated (soft & sticky) and unless you like spending money on tires you probably shouldn't get them for any 'ol Mustang just because they fit the size requirements you need.

Michelin PS2's would be a better and longer lasting choice IMO Michelin Pilot Sport PS2

OP, what do you think about the CCW 505's?