sra fs/ft

[flamed notch]

I know its not a cobra part, but alot of you guys may be interested in this for a rearend swap.

I have a 8.8 sra fs/ft out of my 2000 saleen. It has 4.10 gears, everything else is stock with less than 35,000 miles. I tok this rear out to put a 97 cobra rear in so that I good run 18x11 rims and 335/30/18 without any rubbing issues. The rear is in excellant condition. Will sell for $400

Also have tubular upper and lower control arms, not sure of the brand, they came with the car when I bought it, they are powder coated in red. They will need new bushings. Will sell for $75

Also have baer cross drill and slotted rear rotors (12") These were the rotors that were also on the car, and are still on the car but will be off in a few days, had to order 13" rotors. They are in good condition also. Will sell for $75

Will sell all as a package for $475.

If need shipped, buyer will have to pay all shipping cost.

Also may trade, let me know what you got. Only Mustang stuff!!

 

[flamed notch]

ttt

 

[flamed notch]

ttt

 

[flamed notch]

ttt

 

[TR2003Mach]

A friend of mine is interested in performing an SRA swap on his '03 Termi. Sick of all the parts breaking on the IRS and everything is impossible to find. My question is: what additional parts would be needed to complete the sway using your SRA and control arms?

 

[flamed notch]

not real sure, I'm guessing uper and lower control arms, I'm not sure if the springs and shocks from the irs will work, I'm sure you could find the answers on here. I also hav the uppers and lowers but they will need new bushings.