Sportlines and Drag trim

Squamishcoyote

Wheel Hoppin
Established Member
Joined
Jul 28, 2011
Messages
727
Location
Squamish bc
Looking into lowering the car again ( currently on the pro-kit), but I'm wondering if It will clear a 28" tall rear tire at the track. I have 3.73's and do NOT want to grab 5th in the 1/4
 

stang8psi

New Member
Established Member
Joined
Jun 14, 2006
Messages
2,078
Location
Delaware
sportlines and a 28" tire on a 20"rim will be super close!!! if its a 275/60/15 it will rub! and will have virtually no weight transfer! Keep the pro kit and do the tires it will fill the wheel gap in pretty good

this car is on sportlines
IMG_20120412_154616.jpg


IMG_20120412_164425.jpg
 
Last edited:

cbrtrx

Member
Established Member
Joined
Nov 27, 2003
Messages
622
Location
tampa fl
Mine is on sportlines and I ran a 275/60/15 rear tire. It's all in the offset of the rim.. I had plenty of clearance and was pulling good 60 foots.
 

stang8psi

New Member
Established Member
Joined
Jun 14, 2006
Messages
2,078
Location
Delaware
Mine is on sportlines and I ran a 275/60/15 rear tire. It's all in the offset of the rim.. I had plenty of clearance and was pulling good 60 foots.

well a race star 15x10 and a 15x8 will rub with a 275/60/15 MT As seen with the picture above ... Not sure what the OP is going to run his on but just giving a heads up on the sportlines and drag wheels that will rub!
 
Last edited:

Squamishcoyote

Wheel Hoppin
Established Member
Joined
Jul 28, 2011
Messages
727
Location
Squamish bc
That's the exact drag tire I was planning on running... Plus I run a 28.7" DD tire, and I don't think I can part with how well the Nt05's ride/handle
 

Users who are viewing this thread



Top