Speedogear mount leaking

jamessims

Member
Established Member
Joined
Dec 20, 2004
Messages
205
Location
Lake Jackson TEXAS
I have tranny fluid leaking out of the Speedogear mount dripping out of the cable. Am I missing a seal? The big seal is there is there one that goes on the cable before putting it into the Speedogear? No sure if wording is correct if any questions pls ask... Need some help on this one or some drawings etc.. Thanks
 

cotchnobra

Member
Established Member
Joined
Feb 11, 2010
Messages
498
Location
SMIBville, Maryland
the speedo sensor with the cable attached going into the trans has just one big o-ring on it. just pull the speedo sensor out inspect the o-ring. also clean the hole the speedo sensor goes into. little to no fluid will come out of there. if any does you might have to much fluid in the trans
 

jamessims

Member
Established Member
Joined
Dec 20, 2004
Messages
205
Location
Lake Jackson TEXAS
Ya that big seal is good I have been doing some reading and these other guys are saying a seal goes in to the vss the you put the cable in over it and it will stop the drip.... Any words
 

cotchnobra

Member
Established Member
Joined
Feb 11, 2010
Messages
498
Location
SMIBville, Maryland
I think I got a brand new one in my tool box. when I get home I today I will take a look and see if there is another seal that is needed. I also have a Factor Service manual that I take a look at.
 

Users who are viewing this thread



Top