so i installed a spec stage 2+ clutch in my cobra yesterday and the fingers of the pressure plate are in alot farther than my stock. not sure if this is normal or not.. also the clutch fork is about an inch farther foward then stock so i adjusted my cable and everything so it has about an inch of slack and the clutch fork still hits the front of the bell housing and the bolt on the weight lookin thing on the fork hits the rivits of the presure plate. so i ground it down.. just wonderin if any one knows what is going on here. also seams like the clutch isnt as possitive as it should be.. everything is installed corectly also.. any help would be great. thanks
