Just wondering what you guys are running for plug gap. Has anyone experimented with opening or closing gaps to see how the engine responded. I'm running tr6's with a KB making 13 ish boost on stock compression ratio, running 91 octane.
spark plug gaps
- Thread starter low12lightning
- Start date
i'd be interested as well to see if someone tested playing with the gaps.
i don't have a KB, but i'm running a stage 4 ported eaton, 6lb lower, 14 degrees of timing on copper TR6 plugs gapped at 0.034" with no issues.
Sean
i don't have a KB, but i'm running a stage 4 ported eaton, 6lb lower, 14 degrees of timing on copper TR6 plugs gapped at 0.034" with no issues.
Sean
ive got tr6's gapped to .030 on a built motor/9:5:1 compression 15lbs on the eaton..never have a problem...runs great
I'm running .037" gap and i'm worried this is allitle hot. Does anyone have pic of a set of plugs pulled with similar boost??
I have a new set of plugs I gapped at .033" They should be fine at the gap I think.
Stage 5 port and an 8# lower here. Have the TR-6's gapped at .034" and it runs just fine.
Users who are viewing this thread
