Spacer ????'s

[Shoeman 1]

Any body running the MM 1/2 inch slipon hubcentric spacer with stock studs & the extended lug nuts? I was told by Lethal it's ok to use the 1/2 inch with extended lug nuts, in fact they said the have several customers running this setup with no problems. Just wanted to see if anybody's got them and have you encountered any problems with this setup. I know there is a 3/8's version, but I thought a 1/2 might be to big for the stock studs.
Thank's

 

[fiveoh2go]

I wouldn't go bigger than a 3/8" spacer myself on the stock studs...

How many threads are exposed with the 1/2" spacer? It can't be many.

 

[Shoeman 1]

I wouldn't go bigger than a 3/8" spacer myself on the stock studs...

How many threads are exposed with the 1/2" spacer? It can't be many.

Looks to be about 6 or 7.

 

[fiveoh2go]

Looks to be about 6 or 7.

I don't know if that is enough. I would err on the side of caution and go with either a smaller spacer, longer wheel studs from ARP or Moroso, or a bolt on type of spacer like this -

Just my .02. :shrug:

 

[RussZTT]

I don't know if that is enough. I would err on the side of caution and go with either a smaller spacer, longer wheel studs from ARP or Moroso, or a bolt on type of spacer like this -

Just my .02. :shrug:

+1. I wouldn't go any larger that the 3/8's either.

 

[Postal Pimp]

ive got 1/4 inch on mine and i thought that was alot.

 

[JustaGT]

I run a 1/4 and then I still went with extended studs