Spacer qustion? need some answers please.

[saleen_4_me]

Ok I've got an 04 cobra with replica saleen's 18x9 all round. I want the back wheels to come out to the edge of the fender, like the 18x10 wheels What size spacer do I need? 1/4 inch, 1/2 inch, or bigger :shrug:

 

[mj8]

3/8 LFP spacer

http://www.lightningforceperformance.com/catalog/productDetails.php?productID=1168

 

[Top_Fuel]

...04 cobra with replica saleen's 18x9 all round. I want the back wheels to come out to the edge of the fender

With 9" wide wheels, you're going to want to use 1" spacers with integral wheel studs (like the ones Maximum Motorsports sells). Lots of guys run these spacers with stock (9" wide) wheels to fill up the rear fender wells. :thumbsup:

 

[saleen_4_me]

With 9" wide wheels, you're going to want to use 1" spacers with integral wheel studs (like the ones Maximum Motorsports sells). Lots of guys run these spacers with stock (9" wide) wheels to fill up the rear fender wells. :thumbsup:

I was thinking 1 inch as well. Thanks for the help. :beer:

 

[RRRR03Cobra]

I installed the Eibach 25mm (1") on a set of 9" rims, it makes the wheels look wider and it brings them out to the fender.