Sorry! Ported eaton?
- Thread starter charliex2
- Start date
Ported eaton info
Unless you have a specific question just search theres a ton of info, or call up posi or steigmeir and theyll help you out
Unless you have a specific question just search theres a ton of info, or call up posi or steigmeir and theyll help you out
you could pull it off and port it yourself that's what I and some others have done 
just takes time and the right tools.
just takes time and the right tools.
Here's my section on here.
Posi Performance - SVTPerformance
That will have plenty of info for you to read. Also do a search on my username and the threads I've started. Now that will be enough to keep you busy for a long time.
Posi Performance - SVTPerformance
That will have plenty of info for you to read. Also do a search on my username and the threads I've started. Now that will be enough to keep you busy for a long time.
I want to know what mods do I have to do with the port?
Is k&n with stock intake the best thing to have on 04 cobra or should I get the cold air intake
Cold air intake will free up power with or w/o a port. Depending on the port you will probably need the following:
1) Ported Eaton
2) Kenne Bell Boost-a-Pump
3) Bigger Injectors
4) Upgraded Mass Air Flow
5) Smaller Upper Pulley 2.76 or 2.80" etc.
6) Auxillary Idler Pulleys (Prevents Belt Slip)
7) Good Tune
dynobobstieg
New Member
K&N is fine.
Here is 500 the Easy way:
04 Cobra-500 Rwhp-the Easy Way
Stiegemeier Ported Blower, Throttle Body and Plenum 60+ RWHP
2.76 BilletFlow Upper Pulley
100 mm Idler
Belt
CAI (unshrouded filter type)
NGK TR6 spark plugs
Tuner
14.5 #s boost steady no drop
That will get you to 500 RWHP
EVERY Ported Blower sent out of my shop has IDENTICAL PERFORMANCE-We stand by our workmanship Always have and Always Will.
Stiegemeier Porting has led the way to the 500 RWHP Cobra Club-Over 6+years and 2800+ Satisfied Customers -Why consider anyone else.
Spark plugs will be factory gapped at .038 confirm and install with a smear of anti seize on threads -Don't over tighten!
(We send an Information packet with all of our Ported Blowers Torque specks included) Please READ It.
To say blower ports differ from vehicle to vehicle is Untrue IF the Porting is IDENTICAL-UNIT TO UNIT.
The Improved CFM will be repeated and so will your Horse Power Gain-CAR to CAR.
Your IAT2 will drop 23 Degrees this helps power and longevity.
Stiegemeier :burnout:
StiegeSplash
[email protected]
636-949-2275
MORE INFORMATION AND TESTIMONIES:
Supercharger Q&A, Moderated by Dyno Bob
Here is 500 the Easy way:
04 Cobra-500 Rwhp-the Easy Way
Stiegemeier Ported Blower, Throttle Body and Plenum 60+ RWHP
2.76 BilletFlow Upper Pulley
100 mm Idler
Belt
CAI (unshrouded filter type)
NGK TR6 spark plugs
Tuner
14.5 #s boost steady no drop
That will get you to 500 RWHP
EVERY Ported Blower sent out of my shop has IDENTICAL PERFORMANCE-We stand by our workmanship Always have and Always Will.
Stiegemeier Porting has led the way to the 500 RWHP Cobra Club-Over 6+years and 2800+ Satisfied Customers -Why consider anyone else.
Spark plugs will be factory gapped at .038 confirm and install with a smear of anti seize on threads -Don't over tighten!
(We send an Information packet with all of our Ported Blowers Torque specks included) Please READ It.
To say blower ports differ from vehicle to vehicle is Untrue IF the Porting is IDENTICAL-UNIT TO UNIT.
The Improved CFM will be repeated and so will your Horse Power Gain-CAR to CAR.
Your IAT2 will drop 23 Degrees this helps power and longevity.
Stiegemeier :burnout:
StiegeSplash
[email protected]
636-949-2275
MORE INFORMATION AND TESTIMONIES:
Supercharger Q&A, Moderated by Dyno Bob
Last edited by a moderator:
K&N is fine.
Here is 500 the Easy way:
04 Cobra-500 Rwhp-the Easy Way
Stiegemeier Ported Blower, Throttle Body and Plenum 60+ RWHP
2.76 BilletFlow Upper Pulley
100 mm Idler
Belt
CAI (unshrouded filter type)
NGK TR6 spark plugs
Tuner
14.5 #s boost steady no drop
That will get you to 500 RWHP
EVERY Ported Blower sent out of my shop has IDENTICAL PERFORMANCE-We stand by our workmanship Always have and Always Will.
Stiegemeier Porting has led the way to the 500 RWHP Cobra Club-Over 6+years and 2800+ Satisfied Customers -Why consider anyone else.
Spark plugs will be factory gapped at .038 confirm and install with a smear of anti seize on threads -Don't over tighten!
(We send an Information packet with all of our Ported Blowers Torque specks included) Please READ It.
To say blower ports differ from vehicle to vehicle is Untrue IF the Porting is IDENTICAL-UNIT TO UNIT.
The Improved CFM will be repeated and so will your Horse Power Gain-CAR to CAR.
Your IAT2 will drop 23 Degrees this helps power and longevity.
Stiegemeier :burnout:
StiegeSplash
[email protected]
636-949-2275
MORE INFORMATION AND TESTIMONIES:
Supercharger Q&A, Moderated by Dyno Bob
How much do yall charge to port them? Or better yet sense yall do them a lot how much does it end up costing after everything?
Visit the website or give them a call. It's all going to depend on what options you're looking for as they relate to your power goal.
dynobobstieg
New Member
Give us a call and we can go over everything with you and make sure you get just what you want.
Pricing at this time is:
Blower only stage 1 $295.00*
Blower only stage 4 $495.00
Blower only stage 5 $595.00
Stage 1 blower tb and pl ported. $450.00*
Stage 4 blower tb and pl ported. $695.00
Stage 5 blower tb and pl ported $795.00
(Prices above include pl ported/polished/welded and tb ported/polished for max gains.)
Stage 5+ blower and purchase of our Dragon tb and pl $1275.00
All Stage 5+ Includes TQ plate, welded and ported Accufab, Dragon tb and pl.
*Guaranteed to outperform any competitor.
Money order discounts.
For more pricing and details call me direct.
Stiegemeier :burnout:
StiegeSplash
636-949-2275
MORE INFORMATION, DATA, PRICING, TESTIMONIES ECT:
Supercharger Q&A, Moderated by Dyno Bob
Users who are viewing this thread
