For a single turbo mounted in front of the motor, how long of an oil feed line is everyone using? Also, where are you pulling the oil from?
Single center mount oil feed length
- Thread starter rotor_powerd
- Start date
about 40 inches. i have a -4 line if you need it. came from my hellion kit. as for tapping, there is a port next/around the oil filer housing that is used for oil pressure gauges and such. for pictures, get on hellions web site and look up there install instructions for the single kit on a 03/04 cobra.
Last edited:
correction! 46 inches.
How much do you want for it? Does it have all the fittings on both ends that I'll need? Thanks.
you would need both 90 degree fittings. one going into the turbo and the other for the oil. i'll sell the line for 20 bucks.
these are the fittings you would need.
67 (1) 1/4" pipe to #4 90 degree oil feed fitting
68 (1) 1/8" pipe to #4 90 degree oil feed fitting
Users who are viewing this thread
