side exhaust for 2006-2008 F-150 supercrew

[triplethreat]

Me and my buddy have supercrew f-150's. I have a 2006 lariat 4x4 and he has a 2008 FX4. We both have the 5'' side steps and we both want the side exhaust that comes in front of the tire, but we dont want to get rid of the side steps. Is there any exhaust out there that will work for us? He likes the look of the gibson with square tips, I like the round ones. If anyone has any pics of a supercrew with sidesteps and side exhaust. Thanks

 

[triplethreat]

no one has a side exhaust on there truck!! No one as any info the can put forward if it is even possible or not!

 

[spike_africa]

I did but not with side steps. I didnt like the extra weight from them so they were one of the first things I took off and sold.

 

[TwinTurbo4vGT]

just have a custom exhaust made

 

[Gallows]

Flowmaster has a kit for the Lightning but nothing newer. Custom is likely your best bet unless you can get the L kit to work.

 

[2veloce]

S/C setup by Bassani

 

[triplethreat]

that is on a supercrew, do you have any more pics of that truck Thanks alot there is hope yet! any more info on the exhaust

 

[2veloce]

S/C = supercab, sorry for any confusion

http://www.bassani.com/part/540414

I do not know why this will not fit the 07-08 trucks - but it is worth a call to Bassani to find out

 

[05 Roush]

Be careful with the SC setup and dumping the exhaust before the rear tire.

What ends up happening is you have to move the muffler up about 2.5 ft. forward and you wind up getting a totally obnoxious drone in the cabin at 1800-2000 RPM (that's about 62-70 MPH). The muffler sits right up under the cab.

I went the true dual custom 3" route with a crossover Magnaflow Stainless muffler setup. Not only did I gain excellent hp (~24 rwhp), it sounds great without the drone.

Info:

Sound clips:

Startup and Idle - Street Level

Low Speed Cruise - Inside Cabin

Takeoff - Inside Cabin

Takeoff on Freeway - Inside Cabin

From a Dig - Street Level

High Speed Flyby - Street Level

 

[triplethreat]

the sound clips dont work and I cant see the pics, help please

 

[05 Roush]

Give it a shot now...

 

[triplethreat]

thanks it works now

 

[killbee]

Here you go made it myself for my 07 Supercrew.Dont pay attention to the welds. I ended up taking it off and rewelding everything on the bench to make it much better.Cost less than $75 to make it.

 

[triplethreat]

Sweet! what system and any sound clips or videos.

 

[killbee]

Sweet! what system and any sound clips or videos.

I used a Summit chambered race muffler 3" inlet, duel 2.5" outlets, 3" chrome tips from e-bay, and I used a muffler shop to bend 2 pipes for the turn outs. I mad a template out of some scrap pvc I had laying around so I could see where and how I wanted the turnouts to run. I then had the shop bend the pipes to the template.Here are a couple of sound clips.
[ame="http://myspacetv.com/index.cfm?fuseaction=vids.individual&videoid=39745381"]MySpaceTV Videos: New truck Exhaust by Sam[/ame]
[ame="http://myspacetv.com/index.cfm?fuseaction=vids.individual&videoid=39744970"]MySpaceTV Videos: New truck exhaust by Sam[/ame]

 

[triplethreat]

thanks !! how much did a;; that cost part and welding?

 

[killbee]

thanks !! how much did a;; that cost part and welding?

The welding was free, I did it myself, twice :-D. Cost me less than $70 in parts. The tips were from ebay,$12.00, they were suppose to be blimished but I could find anything wrong with them.

 

[jakdad]

no one has a side exhaust on there truck!! No one as any info the can put forward if it is even possible or not!

I have a Bassani Stainless on my 2008 FX2 regular cab. The exhaust was a low milage cat back exhaust off of a 2001 Lightning. I had a muffler shop install it for me. He cut the Y-Pipe and made mine true dual exhaust from the front to back.Don't know what to tell you about the steps.
Good luck,
Jim


http://www.svt-enthusiast.com/modules/gallery/Jims-Pics/Bassani_on_FX2_004

http://www.svt-enthusiast.com/modules/gallery/Jims-Pics/Bassani_on_FX2_003

 

[foxracermenace]

That magnaflow kit looked nice!