Short Runner Intake Question

[dragracingfreak]

Hey guys. I've been thinking about doing the short runner intake mod and maybe port and polish it while im at it. I've done some reading and have found around how much hp an tq you can gain. But I would like to know some track times to that others have got and and how much they picked up after they done it. I couldn't find where anyone posted any 1/4 mile times.

 

[dragracingfreak]

Anybody have any answers? Or results with your SRI?

 

[98 N/A 4V]

I did my own. I picked up 16rwhp and 4rwtq at peak. Under the curve I picked up as much as 30rwhp. Knocked off a solid 2 tenths.

Hope this helps.

-Mark

 

[dragracingfreak]

Thanks mark. That's what i like to here. And do remember how much you cut out of each runner?

 

[GRUSE]

You may already have viewed this it post 21 has a dyno sheet for SRI,Google NASVT he's the man.


http://www.svtperformance.com/forums/showthread.php?901234-Short-Runner-intake-How-To

 

[shurur]

http://www.svtperformance.com/forum...Meter-what-do-I-need-to-install-on-a-97-Cobra

This too from na svt...

 

[98 N/A 4V]

I removed 1 5/8" off the runners. I then welded the belled end back on and smooth out any welding flash inside the runner. You can cut more off (no more than 2" though).

-Mark

 

[gq916]

check out the link below...it has my graph with a shortrunner

http://www.svtperformance.com/forum...dyno-today-Legit-Numbers-This-Time&highlight=

 

[dragracingfreak]

Thanks you all, these are very helpful.