shifter seems loud?

:decepTion:

New Member
Established Member
Joined
Mar 18, 2010
Messages
170
Location
Naperville, IL
on my way home from class today i notice my steeda tri ax seems to be rubbing up against the console more than i have ever noticed... and shifting in 1st and 2nd im hearing alot of noise feels like a bolt is protruding this very possible? or cud my synchros be going bad and 2nd gear etc? how hard is it to remove the console to get at it? sometimes it feels as if when i shift into 2nd i feel like the shifter pops in twice etc
 
Last edited:

01yellercobra

Well-Known Member
Established Member
Joined
Oct 5, 2005
Messages
21,331
Location
Cali
To pull the bezel up I grab it at the bottom on the inside of the shift boot. Just pull up and it'll pop out. Unscrew the shift knob and it'll come up. Then you can see if anything is loose.
 

:decepTion:

New Member
Established Member
Joined
Mar 18, 2010
Messages
170
Location
Naperville, IL
so i went to back out the cobra.... cuz i wanted to work on my shifter that i suspected to be loose. fair enough ya? well my shifter said no sir....
254578_2185982728765_1222947794_32762436_124562_n.jpg
 

01yellercobra

Well-Known Member
Established Member
Joined
Oct 5, 2005
Messages
21,331
Location
Cali
:lol:

Back when I had my stock shifter I replaced the rubber bushings with some bronze bushings and different bolts. I noticed over time the throws seemed to get longer. One day I went to put it in first and my shifter did the same thing.
 

Users who are viewing this thread



Top