setup

[Lethalvenom2008]

who makes the harness for the s197 style maf to cut and splice into the factory maf wires?
also who makes a tub k member that i can use factory a-arms.?
i removed my manual transmission and installed a 4r. all i need is the ecu and get it programmed? i want to have push to start and remote start .any recommendation of who i should go with i dont want to pay alot.

 

[99riocobra]

I'd check out VMP Tuning Inc for the maf harness. Not sure on the K-member with stock A-arms.

 

[TwinTurbo4vGT]

VMP sells the harness, QA1 k member can use factory A arms.

 

[Lethalvenom2008]

thanks you guys. also on the main hot side of the turbo i know that plumb's into the exhaust where does the other hot side of the turbo go .? just dumped into the atmosphere?

 

[99riocobra]

You have exhaust coming out of your engine going to the inlet of the turbine. The outlet of the turbine then goes to however you want to route the xhaust away from the car. Many choose to connect it to a stock style catback, or some just run an open downpipe dumped under the car. The wastegate on the turbine inlet side can alos be re-routed back to the downpipe or open to the atmosphere as well.