Setting up plx module to datalog on X4..need help!

[SLO_SHO]

Hey all,

I have a question regarding setting up my x4 to datalog with the plx module. I have the gauge coming in the mail but still need to set up the FireWire to log, can someone please tell me how the wires actually go in the analog port? Can't find any info on it online and it's my first go at it so don't want to screw it up. There's a 4 pin connector on the back of the sm-afr module , two of the spots will be filled with the gauge but how do I get the other two.wires for datalogging to stay in the analog connector?

Thanks!

Pic for reference, 2 ports on the left will be for the gauge, I believe it comes with a housing for the wires? Not sure

Sent from my Pixel 3 using Tapatalk

 

[robvas]

You need a female molex connector, rectangular 4-pin

4 Pin Connector, Pigtail, 0.062'' Terminals, 18AWG, 12''

www.jpmsupply.com

Did you just buy the PLX on eBay?

 

[SLO_SHO]

I did buy the plx off ebay. I also did make a connector that worked fantastic for logging. I ended up selling the car, but still have the connector/wire for logging.
If anyone sees this and needs the cord/connector for logging let me know and I'll send it your way as I have no use for it anymore.

Sent from my SM-S901U using Tapatalk