Rota DPT Wheels & Toyo R888 Tires

sqidd

Active Member
Established Member
Joined
Sep 3, 2002
Messages
688
Location
My House
Rota DPT Wheels & Toyo R888 Tires **PRICE DROP**

Rota DPT Wheels & Toyo R888 Tires

This is a nice setup. The wheels are Rota DPT’s. They started life as 18x9.5’s but I had the rears widened by Weldcraft to 10.5”.

The R888’s have been on there for maybe 400mi. They are not worn at all that I can measure with a set of calipers.

These fit great. They are still in the fenders like they are supposed to be, but they don’t rub. I have some thin spacers for the front that you can have in case your struts are fatter like the ones I was using.

The silver stripe is just pin stripe. If you don’t like it you can peel it off.

Here are the specs:

Front rims – 18x9.5 with a 44mm offset

Rear rims – 18x10.5 with a 56.7mm offset

Front tires – Toyo R888 275/40-18

Rear tires – Toyo R888 305/35-18 (these are actually 314.5mm wide, so they are FAT)

This is what it would cost to replicate this setup:

Rims - $1000

Widen rears - $500

Tires - $1330

Road force balancing - $100

New TPMS sensors - $160

Total $3100!!!!!!!

I’m selling these for $1350 if you pick them up.

If you need them shipped I can give you a quote. But they won’t be cheap. It will be anywhere from $55-100 per wheel/tire depending on where they are going and if it’s a commercial address. These shipping costs are for UPS Ground only. No PO Boxes, APO’s, Alaska or Hawaii.

First Pay First Serve

IMG_1630_zps3tjjbyrj.gif


IMG_0113_zpswrapinf1.gif


IMG_0154_zps2p89bgwp.gif


123126d1298677851-what-size-wheels-do-you-run-rota-dpt.jpg


Toyo_Proxes_R888.jpg
 
Last edited:

Users who are viewing this thread



Top