right front turn signal is out

[97pgcobra]

how do I get to it to change it out???? I hope I don't have to pull out the whole headlight assembly. Can anyone tell me how to get to it???

 

[19mustang95]

1.open your hood
2. lift up the plastic flap above headlight.
3. remove one nut from corner marker(13mm or 11mm)
4. remove corner marker
5. replace bulb
6. reverse.

 

[albino96]

1.open your hood
2. lift up the plastic flap above headlight.
3. remove one nut from corner marker(13mm or 11mm)
4. remove corner marker
5. replace bulb
6. reverse.

Yeah that will work, but you should check your blinker fluid before you do anything. Could just be low. :smmon:

 

[97pgcobra]

1.open your hood
2. lift up the plastic flap above headlight.
3. remove one nut from corner marker(13mm or 11mm)
4. remove corner marker
5. replace bulb
6. reverse.

Thanks for the reply, I'll do that tomorrow.
On a side note, how in the hell did you run that time in the 1/4? That is very quick with your #'s. DR's and a good gear???? I've never run mine at the strip, but I've got 4:10's and BBK LCA's and it hooks like hell. I was hoping for low 13's if I ever get out to a strip.

 

[97pgcobra]

Yeah that will work, but you should check your blinker fluid before you do anything. Could just be low. :smmon:

No, I just checked the blinker fluid and it is fine.:loser:JK, lol