Requirements to fit 325/30/19

[FlashNinja11]

I assumed this was the best place to post but I am planning on buying a set of AMR 19x10s for the rear of my car. I know it will be a stretch if possible but is there anyway I can fit a 325/30/19 tire on the AMR 19x10 that can be found here: http://www.americanmuscle.com/charcoal-amr-19x10-0513.html.

 

[Matt@DTD]

Thank you for the post tcole.

You can physically mount a 325/30R-19 sized tire on a 10" wide wheel but it is not recommended. The approved rim width range for this tire size is 11" to 12". Mounting a tire of this width on a rim narrower than 11" will cause the sidewall to pinch upwards which makes the tire flex where it wasn't designed to do so. This causes the tire to generate excessive heat which can lead to irregular wear, premature wear, and worst case failure.

 

[FlashNinja11]

Can I fit a 305/30/19 on a 19x10 without issue or would it also stretch?

 

[Matt@DTD]

Can I fit a 305/30/19 on a 19x10 without issue or would it also stretch?

The approved rim width range for tire size 305/30R-19 is 10.5" to 11.5" so this size tire will bulge slightly if mounted on a 10" wide wheel.