I can't find the write-up i looked at a while back. Can someone either post the link or confirm what I think I remember?
1. Loosen top nut on struts.
2. Remove wheels.
3. Remove brakes (calipers and rotors)
4. Loosen two bolts that hold the strut to the spindle.
5. Support bottom of A-Arm with floor jack.
6. Remove top nut.
7. Remove bottom bolts.
8. Slowly lower jack and let A-Arm down.
9. Remove old strut.
10. Installation is basically the reverse.
Just want to make sure I have the right idea before I go do this.
Thanks.
1. Loosen top nut on struts.
2. Remove wheels.
3. Remove brakes (calipers and rotors)
4. Loosen two bolts that hold the strut to the spindle.
5. Support bottom of A-Arm with floor jack.
6. Remove top nut.
7. Remove bottom bolts.
8. Slowly lower jack and let A-Arm down.
9. Remove old strut.
10. Installation is basically the reverse.
Just want to make sure I have the right idea before I go do this.
Thanks.