Removing Seats

[Blkblk13car]

So I’m going to be removing my Recaro fronts for a good extractor clean in the carpets. I just cannot figure out how. The front bolts are fairly straight forward but the rear I’m lost...
Any one know how?


Sent from my iPhone using the svtperformance.com mobile app

 

[manny231988]

There is 2 plastic covers in the back pop em off and the bolts will be visible pretty simple

 

[Blkblk13car]

There is 2 plastic covers in the back pop em off and the bolts will be visible pretty simple

I was thinking I was breaking something prying them. Awesome thanks

 

[Snoopy49]

Make sure you disconnect all the wiring under the seat.
Updated with additional information.

2014 Mustang Seating Removal And Installation.pdf

 

[Snoopy49]

NOTICE: Do not reinstall the cushion side shield or side shield retainers after removal. These are one-time-use items that become damaged during removal and may not remain attached if reinstalled. Install a new side shield during seat assembly.

Manual
Valance Panel - Ford (BR3Z-7662186-AA)
Valance Panel - Ford (BR3Z-6362187-BA)

Power
Valance Panel - Ford (BR3Z-6362186-BA)
Valance Panel - Ford (BR3Z-7662187-AA)

 

[Blkblk13car]

NOTICE: Do not reinstall the cushion side shield or side shield retainers after removal. These are one-time-use items that become damaged during removal and may not remain attached if reinstalled. Install a new side shield during seat assembly.

Valance Panel - Ford (BR3Z-6362186-BA)
Valance Panel - Ford (BR3Z-7662187-AA)

Whoa good call

 

[Blkblk13car]

NOTICE: Do not reinstall the cushion side shield or side shield retainers after removal. These are one-time-use items that become damaged during removal and may not remain attached if reinstalled. Install a new side shield during seat assembly.

Valance Panel - Ford (BR3Z-6362186-BA)
Valance Panel - Ford (BR3Z-7662187-AA)

Recaros are the same? Even with the manual controls?

 

[Snoopy49]

Recaros are the same? Even with the manual controls?

I overlooked that, I added the manual shields to my original post. Thanks for pointing that out.

 

[Blkblk13car]

I overlooked that, I added the manual shields to my original post. Thanks for pointing that out.

No, thank you - it’s something I would have never seen. So just removing the entire seat assembly still requires the valence change? I was thinking it was just the bolts


Sent from my iPhone using the svtperformance.com mobile app

 

[Snoopy49]

According to the seat back removal procedure, you have to remove the cushion shield (valance panel) before you can remove the seat back.

 

[Snoopy49]

Latest version of the PDF. I left out the seat removal procedure.

2014 Mustang Seating Removal And Installation.pdf

 

[Blkblk13car]

According to the seat back removal procedure, you have to remove the cushion shield (valance panel) before you can remove the seat back.

Gotcha, so if I leave the seat intact and just unbolt the bracket from the car i should be golden. I’ll likely grab the valences down the line so I can strip the covers and have a leather working show take a crack at them.