question on blower hieght

[PKWhiteKnight]

How tall is the stock blower
Just where it bolts to the lower intake to the top...
DOn't include the inlet over the top of the blower..
Just need the dimensions of the blower itself

I need
1)height
2)how wide it is
3)lenght from the back to the tip of the snout with the pulley

Thanks alot guys i appreciate it
Paul

 

[1 VET ETR]

Paul,

The Lightning Blower is an Eaton M112. Here is an address for the specs http://www.automotive.eaton.com/product/engine_controls/M112.html

Enjoy

 

[PKWhiteKnight]

thanks but how are those numbers converted in to inches?
for example
B says 192.0'
in inches that would be?
c is 136.8'

:read: hum.....

 

[Hilander]

25.2mm is 1", at least that would be pretty close from memory.
So 192mm is 7.61"
Hope that helps.

 

[PKWhiteKnight]

ok sweet thanks
i just wasn't sure if those were in mm to start off with