Question for nitrous guys

J_verrett5oh

Member
Established Member
Joined
Dec 3, 2014
Messages
75
Location
Houma, louisiana
Putting a nitrous system on my car
where and which wire are you guys tapping into to get rpm signal for window switch
and also tps for wot signal
 

oldbones

The blue bowtie
Established Member
Joined
Apr 20, 2005
Messages
1,362
Location
Here
It depends on the controller your trying to use. For example, my innovative psn-1 needs a clean tach. signal, but my nos controller is fine with picking up off a coil or injector.
 

5lho

Active Member
Established Member
Joined
Mar 14, 2012
Messages
985
Location
Point Roberts
maybe this'll work...it's good enough for shift light installs and wot.....

Pin 70 on the PCM, it's a white wire with a violet stripe, in the middle connector.

The TPS is the brown wire at the throttle body.
 

Users who are viewing this thread



Top