Hers the deal, my scan tool doesnt read the MAF in voltage it reads it in LBS/Min. Can anyone tell me if my MAF readings are ok? I usually get around 56-58 Lbs/Min under WOT. Can Anyone help convert that or help out? Thanks Jamie
Question for all you Tech guys........
- Thread starter 03DarkShadow
- Start date
Ive noticed that as well and was curious if there was a conversion that could be used to convert the lbs/min to volts so we could tell if we are pegging the MAF.
ttt
ttt
The closest I can come to is 1 pound-feet/minute=.02259697 watts. or 3.03 horsepower. I'm not a brain or anything I have a conversion chart which if you e-mail me at [email protected] I will send it to you.
Converting this is not the best way. Borrow a scan tool that reads maf volts. It's the only way to be sure you are pegging the meter. I really doubt the meter is pegged.
Rick
Rick
Hey guys for those of you with the autotap, upgrade to the latest version released 3/17, ver 2.04, it now has MAF voltage which is what we are really interested in to see if it pegs.
Users who are viewing this thread
