Question about Vortech V2 on my 03 Mach 1

[btmach1]

I've got a Vortech V2 setup on my 03 Mach 1 and I would like to get rid of the standard bypass valve setup. What would you guys recommend I get or would it be easy to switch to a BOV setup? If so what would I need to do to run that setup?
Picture to see what I'm working with...

 

[ZeroDCX]

You would really need to run a blow through setup to run a bov. So I would recommend purchasing an A2A Intercooler, piping, bov, maf of choice.

Actually there is a intercooler kit for sale in the Engine/Drivetrain Section that would be perfect for you.

http://www.svtperformance.com/forums/showthread.php?1067329-CX-Racing-intercooler

 

[MOTOWN M]

I would ride in a car with a Blow off valve before you invest in one , they are LOUD and can be very annoying at times.

 

[shadowmach]

Nothin sounds better than the blower venting to the atmosphere!

 

[01yellercobra]

Sometimes I miss my F1A set up. It was good for scaring people that pissed me off on the road.

 

[Mach828]

I'd get an aftermarket A2W (with ice box) or A2A setup (treadstone not ebay special) and an HPX MAF with the Tial 50QR. You can't put a BOV with that non-intercooled setup because you will create too much turbulence for a clean MAF signal since there is no distance between the blower outlet and throttle body.

You are looking at about $1,000-$1,500 in parts depending on what all you get.

If you want to keep the non-intercooled setup, get the Tial 50 QR and vent it back into the blower inlet. It will sound better than the stock vortech unit.

 

[canadianmach1]

something like this would be cheap and easy, its a bit better than the plastic one.
http://www.superchargersonline.com/...uct_info&cPath=510_1155_1156&products_id=4864

 

[btmach1]

Thanks for the help guys. Might go with the Tial 50 QR