Question about IRS Diff Seals

[JJP SVT]

Hi All,

Is it difficult to change the axle seals in the IRS differential? I recently pulled the diff to reseal the rear cover,install MM bushings and BF brace. I figured since I'm in there I'll install new axle seals too.

Thanks!
John

 

[Charles236]

The seals just pull straight out, new seals go in same as any other seal. I replaced my seals and stub shaft bearings when I built my pumpkin a few months ago, no problems then, but wanted to do it while it was apart. The FRPP IRS bearing and seal kit #M-4413-A was the parts I used.