Quadcammer-Fuel Setup Question

SlwSVT

Member
Established Member
Joined
Oct 21, 2002
Messages
664
Location
Belen, New Mexico
Hey Quad,

Are you running your BAP before the FDPM or after? Do you have the upgrading wiring kit? I added a LP wiring upgrade kit and it completely drained my battery. I have tried re-wiring everything and cannot get the pumps to cycle on with the relay. Every write up I found is for the 03/04 cars. We don't have the same green/yellow wire for the pre FPDM wiring of the BAP on our cars. What wire did you cut to wire in your BAP?

Thanks
 
Last edited:

Quadcammer

4cams aren't better then1
Established Member
Joined
Nov 21, 2002
Messages
11,540
Location
jersey
I have the bap after the fpdm.

Yeah, i upgraded teh wiring.

I cut into the brown/pink wire for the bap.
 

SlwSVT

Member
Established Member
Joined
Oct 21, 2002
Messages
664
Location
Belen, New Mexico
Quad,

If you don't mind, could you tell me which wires go where? BAP red fused wire to? BAP non red fused wire to? Relay wires 85,86, 87 and 30? I believe I have mine wired correctly, but think I might have a bad relay.

Thanks
 

Quadcammer

4cams aren't better then1
Established Member
Joined
Nov 21, 2002
Messages
11,540
Location
jersey
Honestly, I don't remember at all. Its been about a year and a half since I did this, so I don't really remember.
 

Users who are viewing this thread



Top