q about how much hp kb or whipple?

LBSVT93

Member
Established Member
Joined
Nov 10, 2005
Messages
439
Location
IL
I have a 04 cobra looking into a kb or whipple looking to see what ave hp I should expect with either or here is what i am planning

kb or whipple 2.3 whipple or 2.6 kb
60 # injectors
bap
mass air
TB

what pulleys should i go with most people say stay with 17 psi on pump gas, and then 19 on race is this correct? Is 600 or so hp a good estimate with pump gas or is that just dreaming? Just looking for some feedback on numbers, and some feedback on the dif blowers,

Thanks
 

Almo

Active Member
Established Member
Joined
Aug 19, 2003
Messages
7,942
Location
Northern Virginia
LBSVT93 said:
630 on pump gas i dont know about that

It will be close depending on the tuner and how much timing they toss at it. I would think the car would have to have all supporting mods including headers to see 630 on 19 to 20 pounds at 18 to 20 degrees on 93 octane. Between 620 to 630 from what I have personally seen so far.

I am speaking of the KB 2.6 with the above statement(s).
 
Last edited:

utfan98

Lack of Restraint
Established Member
Joined
May 20, 2005
Messages
1,897
Location
MI
622HP 594 RWT on 20 pounds @ 24 degrees max 102 octane on the Whipple

Replaced the 3.25 with a 3.0 upper, probably around 640 with a 110mm MAF housing and filter may it the 650 RWHP mark.
 

fr03cobra

Active Member
Established Member
Joined
Dec 6, 2002
Messages
2,568
Location
Jax, FL
utfan98 said:
622HP 594 RWT on 20 pounds @ 24 degrees max 102 octane on the Whipple

Replaced the 3.25 with a 3.0 upper, probably around 640 with a 110mm MAF housing and filter may it the 650 RWHP mark.


10 more hp is not worth me paying for race gas. you must pay alot for gas. The nearest gas station with race gas is 20 miles from me. you running a a 2lb lower?
 

Users who are viewing this thread



Top