Looking to start detailing the undercarriage of my cobra soon. Looking at the front sway bar I noticed my cobra came with what looks to be a blue front sway bar with the spacer installed. I'm assuming it is the 35mm Steeda front sway bar. It has rust and could use a fresh powder coat. Does anyone have any experience with powder coating the front sway bar? I'm thinking I can just tell my powder coater and he can add an additive to make it more flexible to withstand the flex it will be enduring?
Also, should I just look into purchasing a stock (29mm) front sway bar and have that powder coated? Doing some research that seems to be the recommendation for the 03-04 cobras as the 35 mm bar adds about 85% more stiffness and is considered too stiff for this platform. The platform is already prone to understeer with the stock bar, adding an even stiffer front swaybar with a stock rear just adds to that.
Also, should I just look into purchasing a stock (29mm) front sway bar and have that powder coated? Doing some research that seems to be the recommendation for the 03-04 cobras as the 35 mm bar adds about 85% more stiffness and is considered too stiff for this platform. The platform is already prone to understeer with the stock bar, adding an even stiffer front swaybar with a stock rear just adds to that.
Last edited: