I am just posting this to help anyone who is trying to choose between the two. I am disappointed with the PLX because it can't monitor Intake Air Temperature 2 (post Intercooler). It seems only the aeroforce does that. Below is a list of what each gauge does. I contacted PLX and was told there is talk of expanding the list. I hope they do. The gauge is nice but unfortunately can't monitor both water temp and air intake 2 temps like I was hoping. I already have a Speed Hut oil temp and oil pressure gauges but only wanted to add one more gauge.
PLX ODB II
1) ABS THROTTLE (Absolute Throttle Position)
2) ENGINE RPM
3) VEHICLE SPEED
4) ENGINE LOAD
5) TIMING
6) INTAKE MAP (Manifold Absolute Pressure)
7) INTAKE MAF (Mass Air Flow Sensor)
8) STFUEL B1 (Short Term Fuel Trim Bank 1)
9) LTFUEL B1 (Long Term Fuel Trim Bank 1)
10) STFUEL B2 (Short Term Fuel Trim Bank 2)
11) LTFUEL B2 (Long Term Fuel Trim Bank 2)
12) AIR INT TEMP (Air Intake Temperature)
13) COOLANT TEMP
14) FUEL PRESSURE
15) O2VOLTAGE 1B1 (Narrowband O2 Sensor Voltage 1 Bank 1)
16) O2VOLTAGE 1B2 (Narrowband O2 Sensor Voltage 1 Bank 2)
17) O2VOLTAGE 2B1 (Narrowband O2 Sensor Voltage 2 Bank 1)
18) O2VOLTAGE 2B2 (Narrowband O2 Sensor Voltage 2 Bank 2)
19) FUEL LEVEL
20) CAT TEMP 1B1 (Catalytic Converter Temperature 1 Bank 1)
21) CAT TEMP 2B1 (Catalytic Converter Temperature 2 Bank 1)
22) CAT TEMP 1B2 (Catalytic Converter Temperature 1 Bank 2)
23) CAT TEMP 2B2 (Catalytic Converter Temperature 2 Bank 2)
24) ECU VOLTAGE
25) ABS ENG LOAD (Absolute Engine Load)
26) AMB AIR TEMP (Ambient Air Temperature) "AMB AIR TEMP");
Aeroforce Inceptor
1) RPM
2) MPH
3) Intake Air Temperature (post Intercooler)
4) Ambient Air Temperature (pre Intercooler)
5) Engine Coolant Temperature
6) Exhaust Gas Temperature (PCM Calculated)
7) Transmission Temp. (auto trans)
8) Manifold Pressure (vacuum/boost) displayed in PSI
9) Fuel Temperature
19) Battery Voltage
11) Battery Temp
12) Injector Pulse Width in msec.
13) Injector Duty Cycle (%)
14) Air Flow Rate into engine
15) Long Term Fuel Trim
16) Short Term Fuel Trim
17) O2 Sensor Voltage
18) Barometric Pressure
19) Ignition Advance
20) Base Spark
21) PCM Spark Adjust
22) Fuel Status (open/closed loop)
23) Wastegate Solenoid Duty Cycle (%)
24) Knock Retard
25) Knock Sensor Raw Voltage
26) Throttle Position Percentage
27) Throttle Position Sensor Raw Volts
28) Calculated Net Horsepower
29) Engine Load
30) Transmission Slip
31) Current Transmission Gear
32) Torque Delivered to Transmission
33) Torque Converter lockup status
34) Brake pressure
35) Brake Booster Travel
36) Steering Angle
37) Non-driven Wheel Speed
38) Lateral G's
39) Yaw
40) Fuel economy (instantaneous and average)
50) P-ratio - pressure ratio MAP/Barometer
Also includes 2 user configurable analog inputs**
PLX ODB II
1) ABS THROTTLE (Absolute Throttle Position)
2) ENGINE RPM
3) VEHICLE SPEED
4) ENGINE LOAD
5) TIMING
6) INTAKE MAP (Manifold Absolute Pressure)
7) INTAKE MAF (Mass Air Flow Sensor)
8) STFUEL B1 (Short Term Fuel Trim Bank 1)
9) LTFUEL B1 (Long Term Fuel Trim Bank 1)
10) STFUEL B2 (Short Term Fuel Trim Bank 2)
11) LTFUEL B2 (Long Term Fuel Trim Bank 2)
12) AIR INT TEMP (Air Intake Temperature)
13) COOLANT TEMP
14) FUEL PRESSURE
15) O2VOLTAGE 1B1 (Narrowband O2 Sensor Voltage 1 Bank 1)
16) O2VOLTAGE 1B2 (Narrowband O2 Sensor Voltage 1 Bank 2)
17) O2VOLTAGE 2B1 (Narrowband O2 Sensor Voltage 2 Bank 1)
18) O2VOLTAGE 2B2 (Narrowband O2 Sensor Voltage 2 Bank 2)
19) FUEL LEVEL
20) CAT TEMP 1B1 (Catalytic Converter Temperature 1 Bank 1)
21) CAT TEMP 2B1 (Catalytic Converter Temperature 2 Bank 1)
22) CAT TEMP 1B2 (Catalytic Converter Temperature 1 Bank 2)
23) CAT TEMP 2B2 (Catalytic Converter Temperature 2 Bank 2)
24) ECU VOLTAGE
25) ABS ENG LOAD (Absolute Engine Load)
26) AMB AIR TEMP (Ambient Air Temperature) "AMB AIR TEMP");
Aeroforce Inceptor
1) RPM
2) MPH
3) Intake Air Temperature (post Intercooler)
4) Ambient Air Temperature (pre Intercooler)
5) Engine Coolant Temperature
6) Exhaust Gas Temperature (PCM Calculated)
7) Transmission Temp. (auto trans)
8) Manifold Pressure (vacuum/boost) displayed in PSI
9) Fuel Temperature
19) Battery Voltage
11) Battery Temp
12) Injector Pulse Width in msec.
13) Injector Duty Cycle (%)
14) Air Flow Rate into engine
15) Long Term Fuel Trim
16) Short Term Fuel Trim
17) O2 Sensor Voltage
18) Barometric Pressure
19) Ignition Advance
20) Base Spark
21) PCM Spark Adjust
22) Fuel Status (open/closed loop)
23) Wastegate Solenoid Duty Cycle (%)
24) Knock Retard
25) Knock Sensor Raw Voltage
26) Throttle Position Percentage
27) Throttle Position Sensor Raw Volts
28) Calculated Net Horsepower
29) Engine Load
30) Transmission Slip
31) Current Transmission Gear
32) Torque Delivered to Transmission
33) Torque Converter lockup status
34) Brake pressure
35) Brake Booster Travel
36) Steering Angle
37) Non-driven Wheel Speed
38) Lateral G's
39) Yaw
40) Fuel economy (instantaneous and average)
50) P-ratio - pressure ratio MAP/Barometer
Also includes 2 user configurable analog inputs**
Last edited:
