Well, I heard it was good to do this if the teflon was flaking, since it would clog up the I/C, so I thought I'd give it a shot. I thought I would take some pics, in case anyone wanted to see the difference. It is not perfect, but at least it's a lot better than it was.
Here's how they looked before I started:
Here is one rotor with the teflon off:
Here's both with the teflon off:
And finally, here's one after I got done polishing it:
Here's how they looked before I started:
Here is one rotor with the teflon off:
Here's both with the teflon off:
And finally, here's one after I got done polishing it: