PCV valve question

[hades_1]

Quick question, is there one or two PCV valves on a stock 4.6L cobra engine?
I replaced the driver's side at 60K a few weeks ago, but then I noticed on the Ford service manual it mentions "replace PCV valve (2)".
Is there one on the passenger side?

 

[Rosco]

It's on the air intake, on the underside, and has a very short hose that conects to the valve cover. Easiest way to find it is to look at the passenger valve cover.

 

[CJK440]

Only one pcv valve in the driver's side. The breather is on the pass side.

 

[robb15033]

1996 Cobra-
PCV is on drivers side and the oil separator/filter is a common mod installed inbetween the pcv valve and the intake.
I got a Steeda pre-fabbed kit. Drain it every weekend. Catches ALOT of oil.
*Picture Of Mine Shows How Easy It Is To Install, (My bracket is upside down though):

 

[hades_1]

Ok cool, so there is one PCV valve on the driver's side and one breather on the passenger side (that doesn't need replacing/ servicing, right?).

 

[robb15033]

You are correct.

 

[hades_1]

Alright, all good then. Thanks

 

[robb15033]

PCV valve cover grommet is cheap but important. Easy install