Passenger side breather

[cbrown9064]

Searched and searched on this topic and either I am not using good syntax or am not finding it.

Entering the home stretch on the Novi 2k build and keep staring at the valve covers. I want to run breathers, but cannot figure out how to get a breather on the passenger side cover. Stock 96 valve covers and 96 intake. What are some ideas people have used?

My my other thought is to get a catch can and run some nice black AN fittings in the valve covers with cloth covered line (for that factory look, did with oil feed, drain and IAC) down to a can. Problem there is I cannot seem to find a can with two inlets and a filter on top.

This cannot be that hard....help!

 

[green99_svt]

http://www.americanmuscle.com/moroso-breather-tank.html

This catch can has twin inlets in 3/8 Npt. I have one I'm going to install behind the bumper.

 

[arayray]

^ I run that as well on my COP Valve Covers, however I painted mine black.

 

[bmorecobra]

I used a Jeg's catch can, it can be configured any way you want (single or double entry for -10 lines). I only use one side because I capped off my passenger side breather and just run one large -10 off my driver's side.

http://www.jegs.com/i/JEGS+Performance+Products/555/52202/10002/-1

Sorry my garage is terribly dark and I'm currently working on the fuel system hence the cardboard/paper towel.

 

[cbrown9064]

Sweet! Thanks, guys! This gives me some great ideas!

 

[LDC2335]

http://www.ebay.com/itm/261737701336?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

I got this one, haven't found a place Im happy with to mount it though, supercharger and intercooler set up take up a lot of extra room.